Samsung is one of the most popular television manufacturers due to its high-quality products. You’ll almost certainly get a remote with your Samsung television when you buy it. The remote, on the other hand, may suddenly cease working or become sluggish. Here are some of the possible causes for your remote to stop working, as well as how to resolve the issues. In this blog we are going to tell you that what to do when Samsung TV is not responding to Remote, so read this blog carefully to get the complete information.
Why isn’t your Samsung TV responding to the remote?
- Remote batteries that aren’t properly attached.
- Low battery power.
- The internet connection is poor.
- Buttons that are broken.
- Your Samsung TV remote sensor is being blocked by something.
- There’s a problem with the television.
- Before moving on to more challenging problems, make sure the batteries are fully charged. If the problem keeps coming back, use one of the ways listed below to fix it.
How to Fix a Samsung TV That Doesn’t Respond to the Remote
Reset TV Remote Control
Certain TV remote controllers may become “frozen,” meaning they will no longer react to your requests. It’s as easy as removing the batteries to reset TV remote controls. Remove both batteries from your TV remote control and this way you can reset it. This is an ideal time to change the remote’s batteries to ensure that it has sufficient power. Try pointing it towards the TV and pressing the power button after you’ve changed the batteries. Is the TV turned on? The TV remote will no longer operate if this is the case. If not, continue reading…
Reset Your Television
It’s possible that resetting your television will solve the problem. To reset your television, use the manual buttons largely beneath the screen. Connect the power cord to the television and unplug it. Make sure you disconnect gently to avoid such problems.
Wait at least five minutes after unplugging the power cable before rejoining it. Try turning on the TV using the remote after the power cord is connected to the wall socket. Use the manual power button to turn on the TV if it won’t turn on with the remote.
Digital Camera Test
A digital camera test may be useful in determining whether the remote’s infrared is operational.
- Switch on your phone’s camera.
- Aim the remote at the camera’s lens.
- Press a button on the remote.
- The remote’s Infrared eye should illuminate on the camera screen to indicate that it is working.
If the remote works, the issue is with the remote sensor on the television. The remote, on the other hand, is defective if it does not work. If required, replace it.
What to do if your Samsung remote won’t work properly?
Resetting a remote that isn’t pairing will fix the problem. Here is how you can fix it –
- Remove the batteries from your remote. Use new ones if at all possible.
- While the batteries are being removed, press and hold the power button for at least 20 seconds.
- By pressing and holding the power button, you can simply activate the device.
- Changing the batteries is a straightforward process.
- Hold down the Play/Pause and Back buttons at the same time to re-link.
When you’re finished
- Press and hold the Return and Play/Pause buttons for at least three seconds while holding the remote near the TV’s sensor.
- The remote will start to communicate with your Samsung television. A message will display on the screen indicating that the remote has been connected to your television.
Purchase a new WiFi module.
It’s commonly located with the power button and an IR sensor, and it’s what’s causing the issue. The TV appears to be stuck in a position of waiting for the network to respond when the WIFI module dies.
They are affordable (less than ten bucks) and can help you link your Samsung TV with your remote. Replace it with the new WiFi module after reassembling everything, and then factory reset the TV.
Ensure that the IR sensor/remote is clean.
This solution is absolutely free and straightforward to implement. Simply blow on the sensor’s terminals and the connection to the board; if they become dusty, the signal will be lost.
To make sure your remote’s sensor is clean and ready to use, do the same thing.
Make sure the remote is connected.
We get it; the remote has been paired before; why shouldn’t it be paired again? Unfortunately, things like these may happen in the world of technology. Check to verify whether your remote is still connected to the TV if you’re not sure why it’s not working and the batteries aren’t the issue. For around 5 seconds, press and hold the Return and Play/Pause buttons. The Smart Remote and your TV will begin to sync.
Check for Software Updates on Your TV
It’s conceivable that the issue is with your television rather than your remote. Because a software problem with the TV is a possibility, we should rule it out by checking whether anything has to be done. Although the technique varies from one television to the next, the following is a general outline.
- Go to Support/All Settings/Settings/Support/Settings/Support/Settings/
- Choose Software Update.
- Choose Network. If you are unable to access this step, skip it.
- To install the update, select Yes/OK.
Volume Control on Samsung Remote Isn’t Working
Why does this happen? One of two situations might be the case if your Samsung TV remote works fine except for the volume controls:
Outdated Firmware: The functioning of smart devices, such as your Samsung TV, is controlled by built-in software, often known as “firmware.” It can also be harmed by software faults (sometimes known as “bugs”) that prevent it from working correctly. When you use the remote to modify the volume on the TV, the problem caused by the malfunction is that it does not respond.
Soundbar Issues: If you’re using a Samsung Soundbar as your TV’s main speaker, it’s possible that your remote isn’t set up to control the volume of the soundbar. Unfortunately, certain TV models don’t allow you to attach your remote to both the TV and the soundbar at the same time, so you’ll have to do it manually.
RELATED – How to Solve LG TV not connecting to Wi-Fi Issues?
Purchase a universal remote control.
An original TV remote can sometimes be the cause of all the drama, even though it seems unusual. Purchase a new remote, preferably one that is universal, which will most likely be of aid and will cost around $10.
Of course, the ideal method for repairing your Samsung Smart TV remote will be determined by the issue that is causing it to fail. If your batteries run out, you’ll need to replace them; nevertheless, you may need to re-pair your remote.
Even if the batteries were OK, as previously said, you may still need to connect your remote—things like these happen.
If your Samsung Smart TV is having problems, another alternative is to disconnect it and leave it for a minute or two. If you’ve tried everything else and your remote still doesn’t work, it’s conceivable that it’s broken, in which case you’ll need to replace it.
Conclusion
There are a few things you may do to diagnose or remedy the problem if your Samsung TV remote stops working. First, replace the batteries, wash the upper edges of the remote, and examine the terminals.
If the red light on the remote continues to flicker, you should try pairing it again. You may also calibrate a touchpad that isn’t working from time to time to fix it.
